NORTH DUBLIN RACING
Racing with passion in Ireland

Home

Riders

GSXR 1000 K1 for sale

Superstock engine by V&M racing UK 155 rwhp + 84.5 ft/lb torque

Power commander with full dyno set up by NDM, dublin

Full Arrow Factory race system, Titanium Can..

White Power competition rear shock.

Forks revalved by Reactive Suspension UK, fitting with Traxxion Dynamics Axxion Racing valves.

Sprint Steering damper.

Lucas adjustable Rearsets
Gilles Clip-ons
Brembo radial 19x18 master cylinder

Steel braided lines front and rear

EBC Pro lite Race rotors (also on wets)

EBC HH pads
K1 GSXR 1000 Race bodywork (just sprayed)
Race intake Tubes

Crash Mushrooms

R&G Swingarm Crash mushrooms

Carbon Fibre frame protectors

New enough Pirelli slicks, sc1 front, sc2 rear

spares

Front wheel with EBC prolite disks, Michelin pilot wets only used once

Rear wheel with standard disk, Michelin pilot wets only used once

Lucas adjustable rearsets

Intake tubes

2 Front fairing brackets

spare double bubble screen

3 spare brembo levers

3 spare clutch levers

spare cables

spare rear spring

Service

Oil changed every 2 meetings, only used silkolene 15w50 oil

Valves just done by Kennedys, Drogheda for 2006 season

Throttle bodies balanced

New front brake seals and fluid changed

New plugs

Ready to go for 2006 season.

5200 euros /£3600 ono

contact lenny on 0860744345 or email lennymc@gmail.com

Johns K3 GSXR 1000!!!

Johns GSXR 1000 K3 is now up for sale. This bike has a very impressive spec, and has helped john secure three podium positions in the clubmans championship last year!

2003 Suzuki GSXR1000

Good solid bike, would be a good bike for Clubmans 201-1010 or ISB. Suspension is very well sorted and handles a dream. Engine has been checked over my Steve down at NDM and everything is perfect. I have a load of spares for it too. Bike can be seen at any of the clubman or National rounds. I have run up front with this bike last year so it is well capable of winning.

Contact john@northdublinracing.net or 087-798-2643.

7100 Euros ono

Spec

160 rear wheel hp

Cresent Kit head gasket. Valves where done by NDM over the winter.

STM Slipper clutch

Akropovic Evo Race system

Power commander

Dynojet quickshifter

Factory Pro Velocity Stacks

Vortex engine cover

20mm K Tech Kit, Ohlins springs 10’s

( 2 more spring sets in different rates, 9’s & 9.5’s, to suit most anyone)

Penske Triple Adjust shock

Spare lighter rate spring

Brembo MC 19X20

Brembo Calliper Spacers to fit 320mm discs (not used yet)

Fork end protectors

Top block Frame sliders

Lightweight Race Fairing bracket

Harris clip ons

Stomp Pads on both Tanks

Regina Race Chain

ProMach Rear sets

Spares

Spare wheels with Dunlop Slicks.

2 Upper fairings

2 lower fairings

1 tail section

Spare Tank with new fuel pump

Spare intake tubes( few cracks but useable)

2 sets of standard clipons

1 set of front discs

3 fairing brackets, 2 race 1 standard ( one race bracket needs a slight tweak to be perfect again)

Original clutch complete assembly

Probably have other spares that I have forgotten about

Pictures

http://www.northdublinracing.net/Gallery/March19th/john.jpg

Metzler Racetec Tyres

Brand new! 180 rear, 120 front

200 euros

Contact Val and ask for the legend on 0868354893

AlpineStars Supertech boots

Size 43

Red

Never crashed in and only worn a handfull of times, there is the normal marks on the heal slider from walking but that is it. Perfect in every way. I’ll get some pictures tomorrow and post them up

Looking for ˆ200 ono .. These boots normally retail for ˆ300 and up.

They are one of the best boots on the market for safety.

Contact John on either john.higgins@jacobs.com or 087-798-2643

SUPERTECH Intended Use: Road Racing

FEATURES. The biomechanically designed inner structure combined with the protective outer provides superior energy absorption.

INSIDE STRUCTURE. Based on racer requests, the inside structure of the SUPERTECH provides biomechanical foot movement for better control, a torsion bar for ankle support and a double hinge in the ball of the foot that replicates the profile of the foot for increased feeling of the brake pedal and shifter. The inside structure is also removable for easy cleaning and/or replacement.

HIGH IMPACT PLASTIC STRUCTURE. Every part of the boot skeleton is injected with high impact resistant PA66 carbon fiber reinforcements. LEG AND FOOT PROTECTION AND FITTING. Shin, heel, ankles, toes and the external side of the foot are protected by the inside structure. Gel padding protects the heel and ankle areas and a breathable lining reduces perspiration and the buildup of heat. Kevlar® speed laces provide the inner structure with a precise fit.

OPENING/CLOSURE SYSTEM. The rear entry opening provides an aerodynamic profile and allows for easy entry and exit.

OUTSIDE STRUCTURE. Aerodynamic design features safety developed streamlined protection for less friction in slides. FRONT SHIN PLATE. Streamlined and aerodynamic plate is injected with high modulus thermoplastic polyurethane (PU) and protects the entire shin and calf areas.. HEEL COUNTER. Wide and ventilated heel counter for increased protection. Internal shock absorbing material dissipates impact energy before it reaches the inside heel structure. Replaceable PTFE coated aluminum sliders are positioned in the back and external section of the heel to allow the boot to slide and absorb shocks during falls. SOLE. Brand new sole has been designed for improved feeling between the rider's foot and the pegs of the motorcycle

email john.higgins@jacobs.com or call 0877982643

Oxtar TCS EVO boots
Blue
Top of the range sports boot
* Replaceable Ankle and calf slider
* Patented TCS EVO System
* Patented MCS System
* Titanium toe slider
* Oxtar sole
Worn very little, only couple months old
Normal scuffs on toes, stitching came away on left boot plastic at inside top. Does not affect the boots function at all.. Size 43
130 Euros ono

email john.higgins@jacobs.com or call 0877982643